CMT Stamp maker

I can't remember who makes stamps onsite, but I have a small problem.
NOT with one of your stamps.
The rubber peice with the lettering on it came off my stamper. I was wondering what kind of adhesive you use to attach it to the stamper when you have the rubber peice made.
I just want to fix my stamper!! :'-)

Dustan Robertson ( aka Lord_Comedy )

Lepages Rubber cement…. clean off the sides of the pieces that go together as much as possible…. coat each piece lightly wait a few minutes and stick together…

Mine did that last year. I just took it back to Rose's (where I purchased it) and they fixed it right away for no charge.

Thanks Gouche. I actually thought of rubber cement after I posted.
O.K. Marking devices used some sort of 2 sided tape. which would be easier given it is a self inking stamper. The part where the rubber stamp goes is a moving mechanism.

I would do that Pooga as I got it at O.K. Marking devices here in Regina. Only problem is I work the hours they are open.

O.K. Marking devices used some sort of 2 sided tape. which would be easier given it is a self inking stamper. The part where the rubber stamp goes is a moving mechanism. - Lord_Comedy

Actually 2 sided tape is a much better solution. Most stamps (fixed and self inking) use two sided tape these days…